Commercial Production Systems

The F&T 450 gpm Variable Electrocoagulation System (patent pending) is designed to provide an efficient and effective platform for medium to high flow Electrocoagulation (EC) water treatment applications. This system is designed to control the EC process by allowing the user to control three treatment variables; the retention time/the flow rate of the water to be treated, the current intensity (amps/cm2, and the selection of sacrificial and non sacrificial electrodes. Three separately controlled 150 gpm reaction chambers, operating in parallel are included in this system. The reaction chambers are easily accessible to allow the user to vary the anode and cathode material selection. Reaction chambers can be disassembled and reassembled to modify the electrode configuration in each reaction chamber.

The system is designed with three centrifugal pumps designed to provide a maximum of 450 gpm output. System operation is accomplished by using a consolidated control panel. The control panel allows the operator to control and adjust key system variables quickly and with ease. System controls can be operated manually or automatically. An option is available to operate the system remotely.

The system is normally configured as skid mounted or trailer mounted depending on the environment and application. The unit can be used in a wide variety of industries from oil and gas, agriculture, industrial waste streams, and many others.


  • ✓ Separate Reactors
  • ✓ User Controlled Voltage and Amps
  • ✓ Control Panel Distributes Valve Setting Indicators for Each Valve
  • ✓ Flexible Electrode Configuration
  • ✓ 450 gpm Centrifugal Pump
  • ✓ Sample Port
  • ✓ Training & Certification Package
Nominal Power Requirements 480v 300 amp 3 phase 60 Hz
Inlet Water Connection 4” Camlock
Number of 150gpm Reactors 3
Maximum Flow per Reactor 150 gpm
Feed Pump Centrifugal
Electrodes per Reactor 42
Pressure Relief Setting TBD by application
Material pH Range 3-9
Piping Material PVC
Physical Dimension 21’7”Lx8’Wx9’6”H / 39’1”Lx8’6”Wx12’5”H trailer
Shipping Weight 46,610 lbs. skid / 58,900 on trailer
Operator Training Certification 2 days
Typical Setup Time 1 day

*Note: This document contains information that is for general purposes and actual characteristics and performance may vary in actual use. Nominal characteristics will be provided in accordance with contract terms. Subject to change without notice.