Produced Water Treatment:
Produced water is a term used in the oil & gas industry to describe water that is produced when oil and gas are extracted from the ground. Oil and gas reservoirs have a natural water layer (formation water) that lies under the hydrocarbons. Oil reservoirs frequently contain large volumes of water, while gas reservoirs tend to have smaller quantities. To achieve maximum oil recovery additional water is often injected into the reservoirs to help force the oil to the surface. Both the formation water and the injected water are eventually produced along with the oil and therefore as the field becomes depleted the produced water content of the oil increases. Electrocoagulation is used as an extremely cost effective and scalable treatment for the reuse of produced waste water.
Frac Water Treatment:
Frac Flowback Water Treatment is a treatment that uses gel also known as a proppant. A proppant is a solid material, typically treated sand or man-made ceramic materials, designed to keep an induced hydraulic fracture open, during or following a fracturing treatment. It is added to a fracking fluid which may vary in composition depending on the type of fracturing used, and can be gel, foam or slickwater-based. Electrocoagulation has been used as a successful treatment of fracking gels and should be considered in any water treatment management of hydraulic fracturing.
Ground Water Cleanup: Electrocoagulation is extremely effective in the removal of naturally occurring salts in well water, as well as the separation of iron, magnesium, calcium, metals, nitrates and sulfur. EC is also well suited for the reclamation of ground water that has been contaminated with heavy metals, high molecular weight hydrocarbons and haliginated hydrocarbons.
Surface Water Cleanup: Electrocoagulation is used to remove bacteria, viruses and cysts from surface water, thereby rendering contaminated waste streams into potable water. EC is particularly effective in the removal of life threatening contaminants such as giardia and crypotosporidium.
Process Rinse Water and Wash Water:
EC routinely remediates process and rinse water from the electroplating, computer board manufactures, textile industry, paint rinse water, steel production, mining industry, automotive industry, equipment repair industry, stack wash water, and pulp and paper. In most cases, the treated water can be recycled and reused.
Electrocoagulation has proven effective in treating sewage water, sewage sludge concentrations, and sewage sludge metal fixation sufficiently to enable land application.
EC is used to pretreat water entering towers as well as blow down water to remove algae, suspended solids, calcium, and magnesium buildup, thereby eliminating costly replacement water.
Radioactive Isotope Removal:
Metal ion isotope removal from cooling water at a nuclear power plant site demonstrates another effective application of electrocoagulation.
Water pretreatment with EC has proven effective in removing bacteria, silica and TSS prior to subsequent polishing with reverse osmosis, ultrafiltration, nanofiltration, photocatalytics.
Water Reuse Resulting in Zero Discharge:
EC cost effectively treats electroplating rinse water, stream cleaners, pressure washers, mining, food processing, drilling mud, etc.
Food Processing Industry:
Meat, poultry, fish, total plant effluent to harvest additional protein and fat for sale, salad oil, beverage, potato processing, vegetable washing, equipment washing.
The removal of metals, oils, and dirt, from the antifreeze. Large fleet users include governments, mining companies, bus companies, trucking companies, service stations, auto dealerships, etc.
Available in 2, 10, 30, 100, 500 and 1,000 GPM sizes but can be sequenced to accommodate any flow rate
Designed for mobility so they can be redeployed following a rigorous quality control inspection
Fully automated with remote computer monitoring
Very low cost grid power or can be equipped with a generator reducing maintenance &
Partnered with other water remediation professionals adding pre and post treatment integrated
Meets or exceeds water regulatory quality standards
What we offer
F&T will control the operation of the technology to insure that each unit is operated in a competent manner and in accordance with the desires and directions of our customers
F&T stands behind our products and will control the quality of the product being marketed to our customers. We provide this through a rigorous training program for both our employees and our end users with specific attention focused on operational processes and proper maintenance of our equipment at all times
F&T will maintain the highest standard of customer service possible
Health & Safety
F&T will control and maintain the highest standards of Health, Environment and Safety on behalf of our employees and customers