200 GPM Portable Electrocoagulation Unit

The F&T 200.1 Electrocoagulation Production Unit (patent pending) is designed to provide an efficient and effective platform for medium to high flow Electrocoagulation (EC) water treatment applications. This system is designed to control the EC process by allowing the user to control three treatment variables; the retention time or the flow rate of the water to be treated, the current intensity (amps/cm2), and the selection of sacrificial and non-sacrificial electrodes. Four separately controlled reaction chambers, operating in parallel, are included in this system. The reaction chambers are easily accessible to allow the user to vary the anode and cathode material selection. In addition the reaction chambers can be disassembled and reassembled to modify the electrode configuration in each reaction chamber.

The system is designed with four centrifugal pumps designed to provide a maximum output. System operation is accomplished by using a consolidated control panel. The control panel allows the operator to control and adjust key system variables quickly and with ease. System controls can be operated manually or automatically depending on the model purchased. An option is available to operate the system remotely.

The system is normally configured as a skid or trailer mounted unit depending on the environment and application. The unit can be used in a wide variety of industries from oil and gas, agriculture, industrial waste streams, and many others.

Accompanying the reaction chambers is the F&T Clean in Place System. The Clean in Place System is a manually controlled maintenance System designed to remove buildup that accumulates on the electrode plates. The Clean in Place System has the capability of using a variety of wash solutions depending on the water being treated. For advanced versions, the Clean in Place System can be operated automatically.

SPECIFICATIONS
Nominal Power Requirements 480v 400 amp 3 phase 60 Hz
Inlet Water Connection 4” Camlock
Number of 150gpm Reactors 4
Maximum Flow per Reactor 150 gpm
Feed Pump Centrifugal
Electrodes per Reactor 72
Pressure Relief Setting TBD by application
Material pH Range 3-9
Piping Material PVC
Physical Dimension 41’7”Lx8’Wx9’6”H
Shipping Weight 58,900 lbs. approx.
Operator Training Certification 2 days
Typical Setup Time 2 day


*Note: This document contains information that is for general purposes and actual characteristics and performance may vary in actual use. Nominal characteristics will be provided in accordance with contract terms. Subject to change without notice.